Sunday, 13 January 2013

Shot reverse shot


The purpose for the shot reverse shot is to show two people in conversation and make the it look like they are looking at each other.The shot reverse shot often incorporates the 180 degree rule and the over the shoulder shot. This helps to show they are together in the same place at the same time. The camera will often be on Person A while he or she is talking and then switch to filming person B when he or she replies to person A.  However, it may also put the camera on parson B while person A is still talking to show person B's reactions and facial expressions to what is being said. 
If the people are filmed talking head on and then its all edited together, it does not look realistic and it may look like one person was not even in the room when the other was being filmed. However, the over the shoulder shot does not always have to be used, as long as the 180 degree rule is used and the person is filmed at an angle, the shot reverse shot can be used.  If person A is seen to be looking off screen and so is person B, it can look like they are in conversation to each other.

This diagram show how the people may bee seen on screen when using a shot reverse shot. The camera is not filming them face on.


This diagram shows the over the shoulder shot.




Here, i have taken screen shots from a short scene of Midsummer Murders. 


These two shots appear one after the other, the two people are in conversation and in the same room at the same time. This is shown using two over the shoulder shots. When it switches from on to the other, this is an example of shot reverse shot. 




These are the next two shots of the two charterers. Over the shoulder shots are not used but the 180 degree rule has been used (as in the shots before) and the angle of the camera added to the fact that both charterers are looking off screen helps to make it look like they are looking at each other. Once again the shot reverse shot is demonstrated here. 

Match on action

Match on action is important and mistakes can usually be made during editing. If the same movement, such as someone opening a door, is filmed as a wide shot and then a close up of the hand, when the the two clips are edited together, the movement must match. If the wide shot shows the door being opened about 4cm and then it changes to the close up and the door is shut and there is the repeated movement of the door opening that 4 cm again, the viewer will pick up on it. It may add confusion but it will also look like a poor edit and the effect would be lost. This is why match on action in import. It is also the same with someone walking. If on a wide someone walks completely past the window and the camera changes to film from behind them, they must still of past that window, even if they are a few steps from completely passing it, the mistake will be noticed. When editing we must make sure that all our movement matches.    

Here, i have taken photos to demonstrate match on action. 




In the top photo i am demonstrating a medium close up of someone opening the door, the door handle is bent and the hand is loosely over it, if we then look at the second photo, the close up, the positioning of the door handle and the hand is the same. If this was in a clip, the movement would flow effortlessly with no problem and the shot would look realistic and it would be a successful edit.  



If this shot of someone reaching for the handle appeared after the one of the door handle being pushed down, then it would not be a clean edit ad it would look unnatural to the viewer. 

The Rules

The Definition of the three rules


Match on match action - A cut made on action or movement between two shots in which the action has been overlapped either by repetition of the action or by the use of more than one camera.


Shot reverse shot -  A film technique where one character is shown looking (often off-screen) at another character, and then the other character is shown looking "back" at the first character. Since the characters are shown facing in opposite directions, the viewer unconsciously assumes that they are looking at each other.

The 180 degree rule  - Two characters in a shot should always be filmed from one side, there is an imaginary line used that must not be crossed as this may create confusion for the viewer. The two people in the shot must have the same left/right relationship to each other.  

Introduction and Brief

The task we were set is called the Preliminary task. I worked in a group of 4, Kristy White, Lotti Bowden, Michaella Reddrop and my self. 

The task we were set was to create a short clip of someone walking in to a room, sitting at a table (where someone else was already sat) and then exchanging a few lines of dialogue. When creating this short clip we had to include:
  • Match on match action
  • Shot reverse shot
  • 180 degree rule

The 180 degree rule



· Figures are balanced
· Figures are symmetrically positioned
· Lighting remains constant
· Action remains mainly in the center of the frame.


The 180 degree rule
Camera position is important so it clearly shows where people are in relation to other people in a room. If it was no right, it may distort how the shape and size of the room is seen. It ensures that relative positions in the frame remain constant.
It is often used in conversations or when two people are looking/talking to each other. By keeping the cameras all on one side of these people, its easy to understand where these people are in relation to each other. On top of this, the backgrounds seen always remain constant because the camera always points at the same area each time. 

Tuesday, 11 December 2012

A level preliminary task

 
I got a video off you tube of  someones A level preliminary task to asses and look at and also help me see where it can work well or faults can be made when it comes to working on my own task.
 
This video shows a lot of cuts where good movement match is needed. The person who filmed and edited this video did very well with this however there is a slight overlap at the beginning. When
   the person in the clip is being filmed from behind it seems he walks past the lockers and he is no longer walking along side them. However, when it cuts to filming him walking towards the camera, he is still walking next to the lockers and is only about halfway past them. It is a very small error however it is something i noticed when watching the clip.
The movement match on his hand is really good when it goes from a wide shot to a close up. The movement is matched really well here and i saw no differences in how his hand was on the handle and no over lapping.  
 
I think the movement of the camera when it follows him as he walks an sits down is really affective and works really well. It is a good way of showing the persons movement through the room.
 
The over the shoulder shot also works well as it shows both people at the same time making it clear they are talking to each other. When the camera is looking over the shoulder of the teacher the paper seems to be upright and when it chances so it is looking over the students shoulder, the paper is bent. This would of been a problem but its shows the paper bending so it does work effectively and is seen to be a movement match and not a error as the viewer can see how the change is made.
 
The brief we were given was to film someone walking into a room, sitting down and having a conversation with someone. I think this clip clearly shows that and fits in well with the task given.  
 
 
 

Storyboard planning

When planning a story board, you must make sure it is easy to follow and shows every clip you want to include in your final cut. You must also make sure that you can easily write a dialogue to go with it.

An important thing to remember is to all ways number each shot. This helps with filming and also editing.  Each clip can be numbered 1,2,3 but if you are showing the same clip with a type of movement or change then using numbers 1a, 1b, 1c is efficient as it also shows there are all different parts of one shot rather then a different shot completely. It can be used in action shots, for example a punch.

Showing movement is important and can be done by simply using arrows.
 If you had a picture of a person and you wanted to show they would be walking, you would draw an arrow next to them pointing the way they would be walking. 

To show the zoom affect is being used on an object or someones face you would draw that object or face with arrows pointing inwards or have the object or face surrounded by lines going from the face or object outwards. Alternatively, you could use the 1a,1b,1c system and draw the full face or object and label it 1a then draw the face or object closer and label this 1b. You would then keep doing this in till you had the look of the correct amount of zoom you wanted drawn onto your storyboard.